Descripción del producto

Introduction:
"Small Flame Igtion" is built in accordance with "DIN ****8: Testing of combustible materials; response to ignition by a small flame, with surface ignition and edge ignition.

Features:

1. The combustion chamber is made from corrosion resistant stainless steel, to maximize operating life.
2. It has large front and side doors for easy access. These are glazed with toughened glass for full view of the specimen during a test.
3. An extensively adjustable burner assembly, mounted on runners, to enable the small premixed flame to be tilted at an angle of *5degree to the specimen and offered to it in one fluid movement.
4. Specimen holder capable of housing the specimens up to and including *0 mm thick.
5. A fully adjustable specimen support frame facilitating lateral movement of the specimen holder so that the flame can be applied either at the specimen centre position, or at laterally spaced points.

1. Multilayer specimen holder
2. Loose fill specimen holder
3. Anemometer ***0 m/s range
4. Timing device with 0.2 sec divisions
5. Pressure reducing valve: Between *0 kPa and *0 kPa

1. Dimensions: **0 mm (W) by **0 mm (D) by **0 mm (H)
2. Gas: Propane with a minimum purity of *5%.